Technical Specifications
Electric Motor for SaniSpray HP 750
Maximum continuous cycle rate
(To prevent premature pump wear, do NOT exceed
maximum recommended speed of fluid pump)
Weight
Operating temperature range
Input voltage
Input current
Oil capacity*
Oil specification*
Maximum force
Notes
* The motor gear-box is shipped from the factory pre-filled with oil. Additional oil must be purchased separately.
All trademarks or registered trademarks are the property of their respective owners.
Recycling and Disposal
End of Product Life
At the end of the product's useful life, dismantle and
recycle it in a responsible manner.
•
Follow the Repair on page 8.
•
Drain and dispose of fluids according to applicable
regulations. Refer to the material manufacturer's
Safety Data Sheet.
California Proposition 65
CALIFORNIA RESIDENTS
WARNING: Cancer and reproductive harm – www.P65warnings.ca.gov.
3A7940A
US
33 cycles per minute
115 lb
23° to 120° F
200-240 VAC, single phase, 50/60 Hz
20A maximum
1.5 quarts
Graco part number 16W645
ISO 220 silicone-free synthetic EP gear oil†
4200 lbf
•
Remove motors, circuit boards, and other electronic
components. Recycle according to applicable
regulations.
•
Do not dispose of electronic components with
household or commercial waste.
•
Deliver remaining product to a recycling facility.
Technical Specifications
Metric
52 kg
-5° to 50° C
1.4 liters
18.7 kN
25