Hints And Tips; Specifications - Sandstrom SMCURVE Instruction Manual

Hints and Tips

Mouse Not Working:
GB
1. Check that the power switch is in the ON position.
2. Make sure the dongle is fully plugged into a USB port and the computer
is on or try the dongle in a different USB port.
3. Check battery installation. Replace battery if needed.
4. If mouse performance is slow or intermittent around a wireless network,
unplug the dongle from the USB port and then reinsert it. To reactivate
the mouse, switch it on, off and on again using the ON/OFF switch at
the bottom of the mouse.
5. Repeat the connection procedure. You can also try moving the mouse
closer to the dongle.
6. If the mouse is moving erratically change the working surface which the
mouse is operating on.

Specifications

Model
Dimensions
Working Voltage
Rated Working Current
Wireless Frequency
Operating Range
Resolution
Features and specifications are subject to change without prior notice.
14
SMCURVE
67 (W) x 109 (D) x 39 (H) mm
DC 3V
< 10mA
2.4GHz
< 6m (open space)
800 / 1600 dpi