Sandstrom SWNLM10 Quick Start Manual

SWNLM10_IB_final101025_running change.pdf 1 10/25/10 1:48 PM
Quick Start Guide
Wireless Laser Mouse
SWNLM10
Thank you
for purchasing your new Sandstrøm Wireless Laser Mouse.
Before commencing the installation and set up, please check that you
have all the items and familarise yourself with this Quick Start Guide.
UNPACKING
Remove all packaging from the unit. Retain the packaging. If you
dispose of it please do so according to local regulations.
The following items are included:
Nano Receiver
(P.N.: MRN)
Mouse
2 x Batteries (AAA size) Quick Start Guide
(P.N.: 2PMNBU08GAY00000-V2)
If items are missing, or damaged please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.
GB-2
SYSTEM REQUIREMENTS
Operating Systems: Microsoft ® Windows ® 2000/ XP/ Vista™ & Windows ® 7
Hardware: 1 available USB port
INSTALL THE BATTERIES
1. Press and lift the battery cover.
2. Insert 2 x AAA battery
3. Close the battery cover.
Please insert the batteries with the correct polarity.
GB-3
CONNECT THE USB NANO RECEIVER
Remove the Nano Receiver from
the mouse and then plug the
Nano Receiver directly into your
computer's USB port.
ACTIVATE THE WIRELESS MOUSE
Switch the ON/OFF button to power on the mouse and then press
the Connect button to activate the connection between the mouse
and the Nano Receiver.
Note : For energy saving, switch the ON/OFF
button to temporarily turn off the mouse and
Connect
OFF ON
to disconnect between the mouse and the
Nano Receiver.
Connect
OFF ON
GB-4
PRODUCT OVERVIEW
Left Button
Scroll Wheel
Right Button
Nano Receiver
Mouse Indicator
• RED LED is on for 10 sec.
¬
Power ON
•
RED LED Blinks for 10 sec.
¬
Connect Button Low Battery Warning
Connect ON/OFF Switch
OFF ON • RED LED Blinking.
¬
Pairing (LED OFF when
Battery Cover
paired or failed after
10 sec.)
GB-5