Sandstrom SWLOM10 Quick Start Manual

SWLOM10_IB_final101025_running change 3.pdf 1 10/25/10 2:21 PM
Quick Start Guide
Wireless Optical Mouse
SWLOM10
Thank you
for purchasing your new Sandstrøm Wireless Optical Mouse.
Before commencing the installation and set up, please check that you have
all the items and familarise yourself with this Quick Start Guide.
UNPACKING
Remove all packaging from the unit. Retain the packaging. If you dispose of it
please do so according to local regulations.
The following items are included:
Receiver
(PN.: R07UMN021P-Y)
Quick Start Guide
Battery (AA size)
(PN.: SWLOM10-004)
Mouse
(PN.: BT-7026-01-Z3-Y)
If items are missing, or damaged please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.
SYSTEM REQUIREMENTS
Operating Systems: Microsoft Windows 2000/ XP/ Vista™ & Windows
® ®
Hardware: 1 available USB port
GB-2
INSTALL THE BATTERIES
1. Press and lift the battery cover.
2. Insert one AA battery.
3. Close the battery cover.
Please insert the battery
with the correct polarity.
CONNECT THE USB RECEIVER
Plug the Receiver directly into the
computer's USB port.
Receiver
7
®
GB-3
PRODUCT OVERVIEW
Left Button
Scroll Wheel
Right Button
HINTS AND TIPS
Mouse Not Working:
1. Make sure the USB receiver is plugged into a USB port and the
computer is on.
2. Check battery installation. Replace battery if needed.
3. If mouse performance is slow or intermittent around a wireless network,
unplug the USB receiver from the USB port and then reinsert it.
GB-4