Invacare Solara 3G Service Manual page 35

Chair equipped with Hand Tilt
Without Contracture
Platform
See Note B
Seat Frame Weldment
See Note A
NOTE:
A. The seat frame for 12‐16 inch deep frames is a one piece weldment. For 15‐19 inch deep frames and 18‐22 inch deep frames there are two
separate components. The two components are the seat frame and rocker tube.
B. This tube is needed for the attachment of front riggings other than contracture platform.
C. Separate gear rack is mounted to seat frame on foot tilt only.
15 -19 Inch Deep Seat Frame
Without Contracture
Platform
See Note A
Seat Frame
NOTE:
A. This tube is needed for the attachment of front riggings other than contracture platform
FIGURE 7.3 Available 15-19 Inch and 18-22 Inch Deep Seat Frame Assemblies
Part No 1160889
12 -16 Inch Deep Seat Frame Assembly
With Contracture
Platform
Seat Frame
Weldment
See Note A
Contracture
Platform Mounts
Here
FIGURE 7.2 Available 12-16 Inch Deep Seat Frame Assemblies
With Contracture
Platform
Seat Frame
Chair equipped with Foot Tilt
Without Contracture
Platform
Gear Rack
See Note C
See Note B
Seat Frame Weldment
See Note A
18 - 22 Inch Deep Seat Frame
Without Contracture
Platform
See Note A
Seat Frame
35
SECTION 7—FRAME
With Contracture
Platform
Gear Rack
See Note C
Seat Frame
Weldment
See Note A
Contracture Platform
Mounts Here
With Contracture
Platform
Seat Frame
Solara®3G/Spree 3G