During Installation; During Use; Service And Maintenance; Dismantling And Scrapping - Beijer Electronics BoX2 pro Installation Manual

CAUTION
The enclosure provides a degree of protection of at least IP20, but when installed in
an apparatus, it should meet IP65.
LE BOÎTIER OFFRE UN DEGRÉ DE PROTECTION D'AU MOINS IP20, MAIS LORSQU'IL EST
INSTALLÉ DANS UN APPAREIL, IL DOIT ÊTRE DE CLASSE IP65.

1.5. During Installation

• Install the device according to the accompanying installation instructions.
• Ground the device according to the accompanying installation instructions.
• Only qualified personnel may install the device.
• Separate the high voltage, signal, and supply cables.
• Make sure that the voltage and polarity of the power source is correct before connecting the
device to the power outlet.
• Peripheral equipment must be appropriate for the application and location.

1.6. During Use

• Keep the device clean.
• Emergency stop and other safety functions may not be controlled from the device.

1.7. Service and Maintenance

• Only qualified personnel should carry out repairs.
• The agreed warranty applies.
• Before carrying out any cleaning or maintenance operations, disconnect the equipment from the
electrical supply.
• The battery must be replaced by an authorized Beijer Electronics service center.

1.8. Dismantling and Scrapping

• Recycle the device and parts of it according to local regulations.
• The following components contain substances that might be hazardous to health and the
environment: lithium battery and electrolytic capacitor.
Beijer Electronics, MAEN275 7
Safety Precautions
2023-09