Vivo STAND-V002FG/W Instruction Manual
Dual monitor desk stand
Hide thumbs
Also See for STAND-V002FG/W:
- Instruction manual (8 pages) ,
- Assembly manual (12 pages) ,
- Assembly (32 pages)
Table of Contents
Advertisement
Quick Links
Dual Monitor Desk Stand
Instruction Manual
SKU: STAND-V002FG/W
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v002fg
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vivo STAND-V002FG/W
Summary of Contents for Vivo STAND-V002FG/W
- Page 1 Dual Monitor Desk Stand Instruction Manual SKU: STAND-V002FG/W Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v002fg GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
- Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
- Page 3 ASSEMBLY STEPS STEP 1 Remove adhesive backing from Grommet Soft Pad (H) and apply it to the bottom of Grommet Plate (C). Assemble Grommet Plate (C) to the underside of Pole (A) using M6x16mm Screws (S-A) and 4mm Allen Wrench (T-B). STEP 2 Secure Grommet Plate (C) to Glass Base (B) using M6x10mm Screws (S-B) with M6 Washers (S-C) and 4mm Allen Wrench (T-B).
- Page 4 STEP 3 Option A: Pole Cover Slide Pole Cover (E), Pole Cable Clip (I), and Arm (D) onto Pole (A). Secure Arm (D) in place using 5mm Allen Wrench (T-C). Insert Pole Cap (L) into the top of Pole (A). Option B: No Pole Cover Slide Pole Cable Clip (I) and Arm (D) onto Pole (A).
- Page 5 STEP 4 Attach Arm Cable Clips (J) to Arm (D). STEP 5 Option A: Flat Back Monitor Assemble VESA Plates (F) to the back of monitors using M4x12mm Thumbscrews (M-A). Option B: Curved Back Monitor Assemble VESA Plates (F) to the back of monitors using M4x30mm Screws (M-B) with M4 Spacers (M-C).
- Page 6 STEP 6 Slide VESA Plates (F) with monitors onto Arm (D) and secure using Security Nuts (S-D). Route cables through Pole Cable Clip (I) and Arm Cable Clips (J). To avoid tipping, do not move arms past the back or front of Glass Base (B).
- Page 7 STEP 7 Adjust the tilt of monitors using 5mm Allen Wrench (T-C). To level the monitors, remove Security Nuts (S-D) and adjust the leveling screw using 3mm Allen Wrench (T-A). Adjust as desired.
- Page 8 : 1HR 8M (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V002FG/W and is the answer not in the manual?
Questions and answers