Machine Parameters And Performance - Philips HD 8753 Service Manual

INTELIA
2.2.

Machine parameters and performance

Minimum
PRODUCT
quantity
QUANTITY
(Puls.)
Espresso
Long coffee
Pre-ground
Hot water
Steam
pannarello
(frother)
RINSE
When performed
No. of pulses
Stopping option
User disable option
Production/Service de-
partment disable option
No. of pulses user adjust-
ment option
No. of pulses Production/
Service department ad-
justment option
Pulse range
(Min. – Max.)
Hard-
Water hardness
ness
1 Soft (up to 7°dH)
2 Medium (7° - 14°dH)
3 Hard (15° - 21°dH)
4 Very hard (over 21°dH)
The default water hardness level is 4. Each litre of water corresponds to approximately
2,000 pulses.
Saeco International Group
Default
quantity
(Puls.)
50 165
70 440
Continues until the water supply has been exhausted (capacitive sensor)
Continues until the water supply has been exhausted (capacitive sensor)
Initial rinse
When the machine is switched
on and the boiler temperature is
Yes, by pressing any key
Descaling cycle frequency
240 litres (480,000 pulses)
120 litres (240,000 pulses)
60 litres (120,000 pulses)
30 litres (60,000 pulses)
Rev. 01 / September 2011
Maximum
quantity
programmable
(Puls.)
600
600
No
≤ 50°C
180
No
No
No
No
No
Without water fi lter
02 TECHNICAL SPECIFICATIONS
Programm. by
User
Production /
Yes
Yes
Final rinse
When the machine is switched off
electronically, manually or auto-
matically after 30', if at least one
coffee has been dispensed, be-
fore switching off
80
Yes, by pressing any key
No
No
No
No
No
With water fi lter
480 litres (960,000 pulses)
240 litres (480,000 pulses)
120 litres (240,000 pulses)
60 litres (120,000 pulses)
Service
No
No
02
Page / 03