Webasto ThermoConnect TCon2 Operating And Installation Instructions page 9

– Apple App Store see Fig. 13
– Google Play see Fig. 14
Fig. 13
2
Fig. 14
u
Install the ThermoConnect mobile app
on the phone.
u
Connect the phone with the Thermo-
Connect TCon2 following the instruc-
tions on the mobile phone app. See
chapter 13.2 "Connect the mobile
2
phone" on page 9.
13.2 Connect the mobile phone
Make sure that you have the Thermo-
Connect mobile app installed.
9040092D
Step 1 of 4
Fig. 15
u Launch the mobile app by clicking the
Webasto icon.
WHE000023A
Step 2 of 4
4
WHE000024A
Fig. 16
3
u
Scan the QR code using the phone
camera. The QR code should be affixed
to the vehicle and to the backpage of
this manual. The QR code can also be
find on the receiver. (See chapter 12
"QR-code labels" on page 8).
2
Step 3 of 4
WHE000025A
4
Fig. 17
3
u Now any name can be entered for the
ThermoConnect TCon2 and be con-
firmed by clicking " ".
Step 4 of 4
1
ThermoConnect TCon2 is now connected
and ready for use. For more information,
2
see "https://www.webasto-comfort. com".
WHE000026A
13.3 User management
More than one user may use ThermoCon-
nect TCon2. When adding new users (see
chapter 13.2 "Connect the mobile phone"
on page 9), an identification message is
required from the new user. Existing users
receive this message as a notification in
their ThermoConnect mobile app and must
confirm or deny a new user. If the user
gets a new phone and tries to pair the mo-
bile phone without access to the previously
paired phone, the confirmation can be
EN
1
WHE000027A
9