Connector To Connect To Heater; Qr-Code Labels; Initial Start-Up - Webasto ThermoConnect TCon2 Operating And Installation Instructions

10.6 Wiring harness installation
EN
1
2
Fig. 9
ThermoConnect TCon2
Main connector
Heater connector
Pushbutton connection
NOTE
Only install the ThermoConnect TCon2
with the ThermoConnect TCon2 wiring
harness.
8
11 Connector to connect to
heater
3
4
4
Fig. 10
Yellow - W-bus
WHE000030A
Black - Analogue
Red - Pin 30, power supply
Brown - Pin 31, ground
See also heater wiring harness.
12

QR-code labels

4
Fig. 11
3
3 2
1
4
WHE000019A
3
2
1
WHE000020A
The QR-code label is needed to couple the
ThermoConnect mobile app with the Ther-
moConnect TCon2 device.
Fig. 12
u Attach one label to a place where it can
be scanned using the phone camera.
For example to the vehicle A- or B-pil-
lar, the side of the dashboard or on the
fuse compartment lid.
u Attach the other label on the back of
the document.
13

Initial start-up

13.1 Install the app on mobile
phone
Apple App Store and Google Play have the
app available.
u
Check that the mobile phone is connec-
ted to the internet.
u
Go to the relevant app store and search
for "ThermoConnect". This step can
also be performed by using the QR
code.
1
WHE000021A
9040092D