Mobile Phone App; My Webasto Connect Web Service; Subscription; Installation And Electrical Connection - Webasto ThermoConnect TCon2 Operating And Installation Instructions

6.2 Settings reset
NOTE
Settings reset performs the following
functions:
Connection settings revert back to de-
fault. Removes paired mobile users and
user phone numbers. Removes all
timers and location-based events.
Procedure for resetting to factory settings:
u Press and hold the pushbutton for 10 s.
u Release the pushbutton.
u
Press the pushbutton 3 times while the
pushbutton LED is flashing.
7

Mobile phone app

The ThermoConnect TCon2 is controlled by
the ThermoConnect mobile app. It is oper-
ated using any compatible mobile phone
that is connected to the internet.
NOTE
To install the app: See chapter 13.1
"Install the app on mobile phone" on
page 8.
NOTE
Not all settings can be controlled by
using the app. More settings are avail-
able in the web service. See chapter 8
"My Webasto Connect web service" on
page 5.
9040092D
8 My Webasto Connect web
service
NOTE
All app settings are also available in My
Webasto Connect and will be syn-
chronised automatically. Context-spe-
cific help for each setting is available in
My Webasto Connect service.
The ThermoConnect TCon2 settings can be
controlled using the My Webasto Connect
web service.
9

Subscription

An active subscription is required to be
able to use the ThermoConnect TCon2. A
subscription fee is payable. You can find
the General Terms and Conditions at
https://my.webastoconnect.com.
When subscription period nears expiration
a reminder will be sent to the ThermoCon-
nect mobile app and / or to user E-mail (if
given in My Webasto Connect service).
Check and renew the current subscription
in My Webasto Connect web service.
NOTE
If the subscription is not renewed be-
fore expiration then the service will be
suspended. A reactivation fee may be
payable to reactivate the service.
10 Installation and electrical
connection
10.1 Scope of Delivery
1
2
3
4
Fig. 2
ThermoConnect TCon2
Wiring harness
Pushbutton (with illumination and
temperature sensor)
QR-code labels (2x)
Not illustrated:
– Velcro stickers (2x)
– Operating- and Installation instructions
EN
WHE000016A
5