KTM F8475S0 2019 Owner's Manual page 64

11 SERVICE WORK ON THE CHASSIS
62
–
Position the swingarm and mount the swingarm pivot.
Info
Pay attention to flat area
–
Mount and tighten nut
Guideline
Nut, swingarm pivot
F01532-10
–
Mount the chain.
–
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
S01222-11
–
Position the foot brake cylinder.
Push rod
Info
Ensure that the dust boot is correctly seated.
–
Mount and tighten screws
Guideline
Remaining screws,
F01555-10
chassis
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
S01229-10
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
Info
Raise the wheel slightly to be able to mount the screw
more easily.
A
.
2
.
M16x1.5 100 Nm
(73.8 lbf ft)
3
4
engages in foot brake cylinder.
5
.
M6 10 Nm (7.4 lbf ft)
6
.
M14x1.5 60 Nm (44.3 lbf ft)
B
.
7
.
M10 60 Nm (44.3 lbf ft)
.
Loctite ® 2701™