Table of Contents
Advertisement
12 BRAKE SYSTEM
12.8
88
100397-01
F00154-10
F00148-10
Checking the free travel of foot brake lever
Warning
Danger of accidents The brake system fails in the event of overheating.
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear
brake.
–
Set the free travel on the foot brake lever in accordance with the specification.
–
6
Check that leaf spring
7
plate
in the brake caliper support are seated correctly.
–
Insert the new brake linings, insert pin
4
cotter pins
.
Info
Always change the brake linings in pairs.
–
Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
–
Add brake fluid up to level
Guideline
A
Level
(brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
2
Position cover
with membrane
–
Mount and tighten screws
Info
Clean up overflowed or spilled brake fluid immediately
with water.
in the brake caliper and sliding
5
, and mount the
A
.
5 mm (0.2 in)
p. 138)
3
.
1
.
Advertisement
Table of Contents
