3.4
Accessibility to the interior of the combustion head
20069041
•
Switch off the electrical power.
•
Remove the fixing screws 11).
•
Remove the 8 fixing screws 1) and the protections 3-4).
•
Unscrew the locknuts 6) and release the tie rod 7, open the air suction duct 12) on the hinge after disconnecting it from ventil
connection.
•
Disconnect the electrode wires 2) of ignition pilot 14).
•
Disconnect the ignition pilot 14) unscrew the connector 15).
•
Unscrew the screw 8) with pressure gauge.
•
Extract the internal part 13) of the combustion head.
•
With burner closed, the accessibility to the interior combustion head is possible by removing the cover 12).
10
3
CHAPTER
Installation
Fig. 11