Danfoss ECtemp Smart Installation Manual page 5

Danfoss ECtemp™ Smart
Ambient temperature
Frost protection
temperature
Temperature range
Sensor failure monitoring
Cable speci cation max.
Ball pressure test temperature
Pollution degree
Controller type
Software class
Storage temperature
IP class
Protection class
Installation Guide
0 ° to +30 °C
5 °C to +9 °C (default 5 °C)
Room temperature: 5-35 °C.
Floor temperature: 5-45 °C.
Max. oor: 20-35 °C (if unrecov-
erable seal is broken then up to
45 °C). Min. oor: 10-35 °C, only
with combination of room and
oor sensor.
The thermostat has a built-in
monitoring circuit, which will
switch o the heating if the
sensor is disconnected or short-
circuited
2
1x4 mm
75 °C
2 (domestic use)
1C
A
-20 °C to +65 °C
21
Class II -
5