Table of Contents
Advertisement
Danfoss ECtemp™ Smart
the female header, in not to bending the connectors.
Press carefully until the frame is xed against the
rubber gasket.
When mounting and reassembling the thermostat.
Important: Do NOT press in the center of the display screen.
Press your ngers under the side of the front part and pull
toward you until it releases from the snap lock:
To ensure that the batteries are fully charged, the ther-
mostat shall be connected to main supply for minimum
15 hours. The current time and day is kept for 24 hours if
mains supply is o .
All other settings are stored permanently.
Installation Guide
11
Advertisement
Table of Contents
Need help?
Do you have a question about the ECtemp Smart and is the answer not in the manual?
Questions and answers