Program Checks - Crestron Isys G-Series TPS-15G-QM Operation Manual

®
Isys G-Series Touchpanels
Cresnet Connections
Ethernet Connections
®
58 • Isys
G-Series Touchpanels: TPS-12G/15G/17G-QM
•
Select Functions | Firmware... to upgrade the TPS-12G/15G/17G-QM
firmware.

Program Checks

Actions that can be performed on the TPS-12G/15G/17G-QM vary depending on
whether it is connected via Cresnet or Ethernet.
For Cresnet connections, display the network device tree (Tools | Network Device
Tree) to show all network devices connected to the control system. Right-click on
the TPS-12G/15G/17G-QM to display actions that can be performed on the
TPS-12G/15G/17G-QM.
For Ethernet connections, display the "System Info window (click the
select the Functions menu to display actions that can be performed on the
TPS-12G/15G/17G-QM.
Be sure to use the Crestron Toolbox to create the TPS-12G/15G/17G-QM IP table.
•
Select Functions | IP Table Setup.
•
Add, modify or delete entries in the IP table. The TPS-12G/15G/17G-QM
can have only one IP table entry.
•
A defined IP table can be saved to a file or sent to the device.
Edit the control system's IP table to include an entry for the TPS-12G/15G/17G-QM.
The entry should list the TPS-12G/15G/17G-QM's IP ID (specified on the
TPS-12G/15G/17G-QM's IP table) and the internal gateway IP address 127.0.0.1.
Crestron TPS-12G/15G/17G-QM
Operations Guide – DOC. 6415B
icon) and