Crestron Isys G-Series TPS-15G-QM Operation Manual page 40

®
Isys G-Series Touchpanels
®
36 • Isys
G-Series Touchpanels: TPS-12G/15G/17G-QM
QM AUDIO INPUT SETUP
Refer to the following table for additional QM AUDIO INPUT SETUP menu details.
QM Audio Input Setup Details
QM AUDIO
INPUT SETUP
SCREEN
CONTROL
INPUT SELECT Selects QM audio source. This selection determines
QM AUDIO 1 whether QM 1 or QM 2 inputs are displayed.
QM AUDIO 2
Restore Default Returns audio settings to their factory defaults.
Audio Settings
Mute A separate Mute button is provided for each of the
volume controls.
QM 1 / QM 2 Prog Adjusts the level of the respective QM input with the –
Volume and + buttons.
QM 1 / QM 2 Mic1 Adjusts the level of Mic1 on the respective QM input with
Volume the – and + buttons.
QM 1 / QM 2 Mic2 Adjusts the level of Mic2 on the respective QM input with
Volume the – and + buttons.
To open the QM AUDIO OUTPUT SETUP menu, touch QM Output on the
GENERAL AUDIO SETUP menu. The QM AUDIO OUTPUT SETUP menu offers
controls for Program Gain, Transmit QM ID and a four-band Speech EQ Trims
equalizer.
The Restore Default Audio Settings button returns all audio parameters for the QM
output to their default settings. After QM AUDIO OUTPUT SETUP parameters
have been set, touch Return to go back to the SETUP MENU.
Crestron TPS-12G/15G/17G-QM
DESCRIPTION
Operations Guide – DOC. 6415B