Slideway - Okuma VTM-200 Operation & Maintenance Manual

2-4.

Slideway

Oil Specification
Amount
Oil Change Interval
CAUTION
Check oil level before starting day's operation.
With the power ON, the lubricating oil is discharged by the amount of three times. The
number of discharging times is set at the parameter. Consult us when changing this num-
ber.
The centralized lubricating oil tank is installed on the rear air panel part. The lubricating oil is fed to
the X- and Z-axis slideways, and the X- and Z-axis ball screws respectively.
SECTION 4 INSPECTION, MAINTENANCE AND ADJUSTMENTS
G68 (Shell Tonna Oil S68)
6 liter (1.59 gal) [Effective amount: 3.6 liter (0.95 gal)]
Replenish as required. Low lubrication level alarm
detected by the level switch occurs in approx.
70 hour operation. Check oil level every day and replenish
lubricating oil before the alarm occurs.
Oil filler port
Oil level gauge
Lubrication tank
5699-E P-55
LE11214R0100600080001