Static Multicast Forwarding By Mac - ZyXEL Communications XMG1915 Series User Manual

Figure 160 No Multicast Forwarding

40.2 Static Multicast Forwarding By MAC

Use this screen to view and configure static multicast MAC addresses for ports to receive the multicast
stream. Click SWITCHING > Multicast > Static Multicast Forwarding By MAC to display the screen as
shown next.
Figure 161 SWITCHING > Multicast > Static Multicast Forwarding By MAC
The following table describes the labels in this screen.
Table 119 SWITCHING > Multicast > Static Multicast Forwarding By MAC
LABEL
Index
Active
Name
MAC Address
VID
Port
Add/Edit
Delete
Chapter 40 Static Multicast Forwarding
DESCRIPTION
This is the index number of the static multicast MAC address rule.
This field displays whether a static multicast MAC address forwarding rule is active or not. You may
temporarily deactivate a rule without deleting it.
This field displays the descriptive name for identification purposes for a static multicast MAC
address-forwarding rule.
This field displays the multicast MAC address that identifies a multicast group.
This field displays the ID number of a VLAN group to which frames containing the specified
multicast MAC address will be forwarded.
This field displays the ports within an identified VLAN group to which frames containing the
specified multicast MAC address will be forwarded.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new rule or edit a selected one.
Click Delete to remove the selected rules.
XMG1915 Series User's Guide
229