ZyXEL Communications XMG1915 Series User Manual page 248

8-16-port multi-gigabit smart managed switch
Table of Contents

Advertisement

Figure 172 SWITCHING > Spanning Tree Protocol > Spanning Tree Protocol Status: RSTP
The following table describes the labels in this screen.
Table 133 SWITCHING > Spanning Tree Protocol > Spanning Tree Protocol Status: RSTP
LABEL
DESCRIPTION
Spanning Tree Protocol: RSTP
Bridge
Root Bridge refers to the base of the spanning tree (the root bridge). Our Bridge is this Switch.
This Switch may also be the root bridge.
Bridge ID
This is the unique identifier for this bridge, consisting of bridge priority plus MAC address. This ID
is the same for Root Bridge and Our Bridge if the Switch is the root switch.
Hello Time
This is the time interval (in seconds) at which the root switch transmits a configuration
(seconds)
message. The root bridge determines Hello Time, Max Age and Forwarding Delay.
Max Age
This is the maximum time (in seconds) the Switch can wait without receiving a configuration
(seconds)
message before attempting to reconfigure.
Forwarding Delay
This is the time (in seconds) the root switch will wait before changing states (that is, listening to
(seconds)
learning to forwarding).
Note: The listening state does NOT exist in RSTP.
Cost to Bridge
This is the path cost from the root port on this Switch to the root switch.
Port ID
This is the priority and number of the port on the Switch through which this Switch must
communicate with the root of the Spanning Tree.
Topology
This is the number of times the spanning tree has been reconfigured.
Changed Times
Time Since Last
This is the time since the spanning tree was last reconfigured.
Change
Port
This field displays the number of the port on the Switch.
Port State
This field displays the port state in STP.
DISCARDING – The port does not forward or process received frames or learn MAC
addresses, but still listens for BPDUs.
LEARNING – The port learns MAC addresses and processes BPDUs, but does NOT forward
frames yet.
FORWARDING – The port is operating normally. It learns MAC addresses, processes BPDUs
and forwards received frames.
Chapter 45 Spanning Tree Protocol
XMG1915 Series User's Guide
248

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xmg1915-10ep

Table of Contents