ZyXEL Communications XMG1915 Series User Manual page 391

Example – Enabling IPv6 on Windows 10
Windows 10 supports IPv6 by default. DHCPv6 is enabled when you enable IPv6 on a Windows 10 PC.
To enable IPv6 in Windows 10:
Select Control Panel > Network and Sharing Center.
1
On the left side of the Network and Sharing Center, select Change adapter settings.
2
Right-click your network connection and select Properties.
3
Select the Internet Protocol Version 6 (TCP/IPv6) check box to enable it.
4
Click OK to save the changes for the selected network adapter.
5
Click OK to exit the selected network adapter Properties screen.
6
Example – Enabling DHCPv6 on Windows 10
Windows 10 supports DHCPv6 by default. To enable DHCPv6 client on your computer:
Select Start > Settings > Network & Internet.
1
On the left side of the Network & Internet, select Ethernet. Then select the Ethernet network you are
2
connected to.
Under IP assignment, select Edit.
3
Under Edit IP settings, select Automatic (DHCP) or Manual. Then click Save.
4
Appendix C IPv6
XMG1915 Series User's Guide
391