Table of Contents
Advertisement
PAGE
5
WEIDER SPORTING GOODS
STEP
1
FRAME
ASSEMBLY
L] Begin by pressing 2" SQUARE PLASTIC INSERT CAPS (55) into the
bottom ends of the UPRIGHT (1).
[30
5/16" NYLON LOCK NUT
| 31
5/16"
X2 1/2" НЕХ HEAD BOLT
| 39
5/16" X2 1/4" HEX HEAD BOLT
[55 2" SQUARE PLASTIC INSERT CAP
[56 11/2" SQUARE PLASTIC INSERT CAP
L] Align the BASE FRAME (2) with the UPRIGHT (1) and secure using
5/16" X 2 1/2" HEX HEAD BOLTS (31) to bolt through the bracket of
the Base Frame and into the front of the Upright.
Secure with 5/16"
NYLON LOCK NUTS (30).
C] Assemble the MAIN FRAME (3) to the UPRIGHT (1) and BASE FRAME (2) by positioning the rear U-bracket of the Main
Frame over the cross-member tube of the Upright and positioning the front U-bracket over the Base Frame tube.
[C] Secure the rear U-bracket at the UPRIGHT (1) using 5/16" X 2 1/4" HEX HEAD BOLTS (39) to bolt through the U-bracket
and then through the front of the Upright. Secure with 5/16" NYLON LOCK NUTS (30).
L] Secure the front U-bracket at the BASE FRAME (2) using a 5/16" X 2 1/4" HEX HEAD BOLT (39) and bolting through the
U-bracket and then through the Base Frame. Secure with a 5/16" NYLON LOCK NUT (30).
[) Press 1 1/2" SQUARE PLASTIC INSERT CAPS (56) onto the ends of the BASE FRAME (2).
[7 Remove the backing from the UPRIGHT DECAL (80) and affix to the front of one side of the UPRIGHT (1).
U-BRACKET
39
31
iiu
oi
4
39
4
0-6
E
gee
30
Advertisement
Table of Contents
