Sending A Status Call - Motorola ASTRO APX 4000 Model 2 User Manual

3 U D
or to Preset for the preset preprogrammed talkgroup.
OR
U D
or to the required talkgroup.
4
Press the Menu Select button directly below Sel to save the
currently selected talkgroup and return to the Home screen.
5
If the encryption key associated to the new talkgroup is
erased, you hear a momentary key fail tone and the display
shows Key fail.
OR
If the encryption key that is associated to the new talkgroup
is not allowed, you hear a momentary key fail tone and the
display shows Illegal key.
6 H
Press to return to the Home screen.
44
English

Sending a Status Call

This feature allows you to send data calls to the dispatcher
about a predefined status.
Each status can have up to a 14-character name. A maximum
of sixteen status conditions is possible.
Note: The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle
and the timer expires. You will hear the Menu Inactive
Exit Tone upon feature exit.
Procedure:
Press the preprogrammed Status button and proceed to
Step 3.
OR
Follow the procedure below.
1 < >
or to Sts.
2
Press the Menu Select button directly below Sts.
3
The display shows the last acknowledged status call, or the
first status in the list.
4 U D
or to the required status.
OR
Use the keypad to enter a number corresponding to the
location in the status list.
5
Press the PTT button to send the status.