Table of Contents
Advertisement
Each voice announcement is within a limit of three
seconds maximum. The sum duration of all different
voice announcements in a radio shall be no more
than 1000 seconds.
Note: This feature must be preprogrammed by a
qualified radio technician.
Check with your agent if Voice Announcement is
available for the feature you need.
The two options of priority for the Voice
Announcement available are:
High Enables the voice of the feature to announce
even when the radio is receiving calls.
Low Disables the voice of the feature from
announcing when the radio is receiving calls.
You hear a voice announcement when the features
below are preprogrammed in the radio.
•
The radio powers up. The radio announces the
current zone and channel it is transmitting.
•
Press the preprogrammed voice announcement
button (which specifically programmed to playback
the current zone and channel). The radio
All manuals and user guides at all-guides.com
Site Selectable Alerts (ASTRO 25)
announces the current zone and channel it is
transmitting.
Note: Pressing this preprogrammed playback
button will always enable the voice feature to
announce in High priority.
All the three programmable buttons at the side of
the radio support this feature.
•
Change to a new zone. The radio announces the
current zone and channel it is transmitting.
•
Change to a new channel remaining within the
current zone. The radio announces the current
channel.
•
Press either the Menu Select button or
preprogrammed button of the radio to launch or
terminate Scan, PL Disabled, Talkaround/Direct or
Transmit Inhibit. The radio announces the
corresponding feature activation or deactivation.
A Site Selectable Alert (SSA) is an Intelligent Lighting
indicator together with audio alert sent to radios at a
site or a few sites to notify the users when there is a
special situation that they need to be aware of. Only
authorized radios are enabled to send SSA.
59
English
Advertisement
Table of Contents
