How The Cycle Works; Setting The Controls - Kenmore SENS-A-CLEAN 665.75842 Use & Care Manual

HOW THE CYCLE WORKS
The SENS-A-CLEAN
TM
Self-Cleaning cycle uses
temperatures much hotter than normal oven use to
break up and burn away soil and grease. The oven is
equipped with a sophisticated electronic sensor that
continuously monitors the by-products released from
burning off the baked-on foods inside the oven and
adjusts the cleaning time accordingly. There is no
guessing on how long to set the time because all
steps are taken care of by the sensor. The oven will
automatically shut off once it senses it is clean. As
another option, the soil level can be manually set to
light, average or heavy soil levels.
The door must be closed completely for it to lock and
the cycle to begin. If properly closed, the door will
lock approximately 6 seconds after START/ENTER is
pressed. The cycle time includes an approximate 30
minute cool down time. To see the time of day during
the cycle, press CLOCK for 5 seconds.
SETTING THE CONTROLS
1, Press SENS-A-CLEAN. PRESS
SEnS setting will automatically determine the
length of cleaning time. Maximum clean time is
4_ hours and minimum is 2 hours.
YOU SEE
2, If you would prefer to manually set the soil level PRESS
yourself, you can choose, Light, Average, or
Heavy.
For light soils, press SENS-A-CLEAN twice, SoilL
will appear in the display. Cycle duration is
2-2_ hours.
For average soils, press SENS-A-CLEAN three
times, SoilA will appear in the display. Cycle
duration is 3-3_ hours.
For heavy soils, press SENS-A-CLEAN four
times, SoiIH will appear on the display. Cycle
duration is 4-4_ hours.
YOU SEE
3, Press START/ENTER.
PRESS
(example shows light soil
setting)
YOU SEE
4,
After the SENS-A-CLEAN Self-Cleaning cycle ends:
LOCKED goes off and the door unlocks.
YOU SEE
36