HOMCOM 821-010V70 Manual page 7

LED INDICATORS
1. POWER
2. CHILD LOCK
3. UP/DOWN
4. TIMER/ HUMIDITY DISPLAY
5. TIMER/ HUMIDISTAT SETTING
6. FAN SPEED (LOW/ HI)
Humidity Level & Timer 2 digit display
The indicator features 3 functions:。
1. when the unit is plugged in, it will indicate the room humidity level.
2. when you set the humidity, it will indicate the humidity that you have selected
3. when you program the time for the unit to turn on and off, it will show the hours.
4. When the environment humidity is lower than 35%, it will show 35
5. When the environment humidity is higher than 95%, it will show 95
OPERATING INSTRUCTIONS
1. The Power indication light will turn on when the unit is plugged in,
regardless of whether the unit is operating or not.
2. Press+++button once to start operation. Press it again to stop operation.
3. Press+++to set the desired fan speed. It can be adjusted between high speed
and low speed.
4. Press+++button and then++ to set the desired humidity level in the room, which
can be set from 40% to 80% at 5% intervals.
After a period of working,when environment humidity is lower than the selected
humidity by 2%, dehumidification will stop and fan stops working 3 mintues later;
When environment humidity is equal to or higher than the selected humidity by 2%,
dehumidification will restart once 3-minute compressor protection time over.
5.press+++button and then++ to set the timer setting：
You can only set the auto-shut off timer while the unit is operating (on).
You can only set the auto-start timer while the unit is in standby (off).
When the unit is on, press the+++button and adjust++ to setup the power-off time.
When the unit is standby, press the+++button and adjust++ to setup the power-on
time.
Press+++button and then press the++ button to set timer from 01-02......23-24
hour.
Press+++button and then++ button to adjust the time to 00 to cancel timer.
The programmed time remains unchanged if the machine stops to work due to
water full or during defrosting
6.press+++button to activate CHILD LOCK
You can activate the CHILD LOCK function by pressing the button for more than 5
seconds. The lamp will light up. When the CHILD LOCK function is activated, all
buttons are locked.
To cancel, press the+++button for more than 5 seconds until the lamp turns off.
6