Troubleshooting - HOMCOM 821-010V70 Manual

TROUBLESHOOTING

If a condition listed below occurs, please check the following items before calling
customer service.
Problem
The unit doesn't
operate
The dehumidifying
function doesn't work
No air is discharged
Operation is noisy
Possible Cause
Has the power cord been
disconnected?
Is the tank full indication
lamp blinking? (The tank
is
full or in a wrong posi tion.)
Is the temperature of the
room above 35 ℃ or below
5℃?
Is the air filt er clogged?
Is the intake duct or
discharge duct
obstructed?
Is the air filter clogged?
Is the unit tilted or
unsteady?
Is the air filter clogged?
11
Solution
Plug the power cord
into the outlet.
Empty the water in the
drainage tank and then
reposition the tank.
The protection device
is
activated and the unit
cannot be started.
Clean the air filter as
instructed under
"Cleaning the
dehumidifier".
Remove the
obstruction from the
discharge duct or
intake duct.
Clean the air filter as
instructed under
"Cleaning the
dehumidifier".
Move the unit to a
stable, sturdy location.
Clean the air filter as
instructed under
"Cleaning the
dehumidifier" .