Table of Contents
Advertisement
Quick Guide
1. Safety Requirements
This section contains information and warnings that must be followed to keep the instrument operating
under safety conditions. In addition, user should also follow the common safety procedures.
Safety Precautions
Warning
Safety Statement
Warning
Caution
Note
Safety Sign
Please follow the following guidelines to avoid possible electric shock and risk to
personal safety.
Users must follow the following conventional safety precautions in operation,
service and maintenance of this device. UNI-T will not be liable for any personal
safety and property loss caused by the user's failure to follow the following safety
precautions. This device is designed for professional users and responsible
organizations for measurement purposes.
Do not use this device in any way not specified by the manufacturer. This device is
only for indoor use unless otherwise specified in the product manual.
"Warning" indicates the presence of a hazard. It reminds users to pay attention to a
certain operation process, operation method or similar. Personal injury or death
may occur if the rules in the "Warning" statement are not properly executed or
observed. Do not proceed to the next step until you fully understand and meet the
conditions stated in the "Warning" statement.
"Caution" indicates the presence of a hazard. It reminds users to pay attention to a
certain operation process, operation method or similar. Product damage or loss of
important data may occur if the rules in the "Caution" statement are not properly
executed or observed. Do not proceed to the next step until you fully understand and
meet the conditions stated in the "Caution" statement.
"Note" indicates important information. It reminds users to pay attention to
procedures, methods and conditions, etc. The contents of the "Note" should be
highlighted if necessary.
It indicates possible danger of electric shock, which may cause
Danger
personal injury or death.
It indicates that you should be careful to avoid personal injury or
Warning
product damage.
It indicates possible danger, which may cause damage to this device
or other equipment if you fail to follow a certain procedure or
Caution
condition. If the "Caution" sign is present, all conditions must be met
before you proceed to operation.
It indicates potential problems, which may cause failure of this device
if you fail to follow a certain procedure or condition. If the "Note" sign
Note
is present, all conditions must be met before this device will function
properly.
AC
Alternating current of device. Please check the region's voltage range.
DC
Direct current device. Please check the region's voltage range.
UPO1000 Series
3/17
Advertisement
Table of Contents
