Table of Contents
Advertisement
User's Manual
3-1 Standard CMOS Setup
The Standard CMOS Setup allows users to configure system components such as
hard disk drive, floppy disk drive and video display as well as date, time and boot-
up error signaling. This configuration menu should be changed when installing a
mainboard for the first time, changing hardware in your system such as the HDD,
FDD, video display, or when the CMOS data has been lost or contaminated. Choose
the Standard CMOS Setup option from the CMOS Setup Utility menu (Figure 3-
1) to display the following screen. When a field is highlighted, on-line help
information is displayed on the left bottom edge of the screen.
Date (mm : dd : yy) : Fri, Sep 19 1997
Time (hh : mm : ss) : 9: 14: 43
HARD DISKS
Primary Master
Primary Slave
Secondary Master : Auto
Secondary Slave
Drive A : 1.44M, 3.5 in.
Drive B : None
Floppy 3 ModeSupport : Disabled
Video
: EGA/VGA
Halt On : All Errors
ESC : Quit
F1
: Help
Date/Time
Set the date and time. Do not skip this function as all of your timed events such
as power management, saving files, etc. are based on this timer.
Hard Disk Setup (Primary/Secondary; Master/Slave)
This category identifies up to four IDE hard disk drives that have been installed
in the computer. This section does not show information on other IDE devices such
as CD-ROM drives or other hard drive types such as SCSI drives.
22
ROM PCI / ISA BIOS (2A69KC39)
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.
TYPE SIZE
CYLS
: Auto
0
0
: Auto
0
0
0
0
: Auto
0
0
(Shift) F2
Figure 3-2 Standard CMOS Setup Screen
HEAD
PRECOMP
0
0
0
0
0
0
0
0
Extended Memory :
: Select Item
: Change Color
LANDZ
SECTOR
0
0
0
0
0
0
0
0
Base Memory :
640K
15360K
Other Memory :
384K
Total Memory :
16384K
PU/PD/+/- : Modify
MODE
Auto
Auto
Auto
Auto
Advertisement
Table of Contents
