TOHATSU MFS 9.9 Service Manual page 21

PTT Unit
Attach cleaned screen 1.
6.
Attach pump coupling 2 to pump.
7.
8. Install motor ass'y to power tilt pump and cylinder ass'y.
9. Attach wireharness mounting screws.
Install motor ass'y 4 to cylinder ass'y and power tilt pump 3
10.
by using screws 5, and tighten screws to specified torque.
Motor ass'y installation screws:
5N･m（4lb･ft） 〔0.5kg f･m〕
11. Fill power trim system with power trim fluid.
Recommended PTT Fluid :
OIL
ATF DEXRON II
Extend trim rod and put PTT unit vertically. Pour
fluid until it overflows from inlet.
Attach the cap 6.
12.
20
1
2
1Pump filter
2Pump/motor coupler
5
3
4
6
4st 9.9/15/20 2009