Table of Contents
Advertisement
CTRL
JACK
CHAN
AUD1
AUD2
AUD3
AUD4
To configure the headphone volume, select the CTRL (Control) menu item in menu level 1, followed by the
JACK (Audio Jack) and VOL (Volume) menu items.
CTRL
JACK
VOL
0 to 64
4.2.20. Setting the Orientation of the Display
The 7707MT-HD provides the ability to adjust the orientation of the display. When using a 3RU frame it is
convenient to have the text read vertical whereas when using a 1RU frame a horizontal display is
desirable. To change the orientation of the display select the CTRL (Control) menu item in menu level 1,
followed by the DISP (Display) menu item.
CTRL
DISP
HORZ
VERT
4.2.21. Selecting the Factory Reset Configuration
It is convenient to have a quick method of returning all configuration settings to a default state. The
7707MT-HD provides a factory reset for this purpose. All values, which are user configurable, will be
returned to a known state, as indicated below. To initialize a factory reset, select the CTRL (Control) menu
item in menu level 1, followed by the FRST (Factory Reset) menu item. The following list describes
possible user selections for this menu item:
CTRL
FRST
NO
YES
7707MT-HD Multi-Signal HD/SD, AES, and Control Fiber Transmitter
Channel 1 is selected to the headphone monitoring jack.
AUD1
Channel 2 is selected to the headphone monitoring jack.
AUD2
Channel 3 is selected to the headphone monitoring jack.
AUD3
Channel 4 is selected to the headphone monitoring jack.
AUD4
0 to 64 Sets the volume of the headphone jack.
Sets the orientation of the text to horizontal.
HORZ
Sets the orientation of the text to vertical.
VERT
Do not initialize factory reset. Return to previous menu item,
NO
without changes.
Initialize factory reset.
YES
Version 1.5
7700 Multi-Frame Manual
Page-23
Advertisement
Table of Contents
