Figure 4-2: Card Edge Menu Structure - evertz 7700 Manual

7700 Multi-Frame Manual
7707MT-HD Multi-Signal HD/SD, AES, and Control Fiber Transmitter
Indications
Toggle
Switch
Page-14
Menu Level 1 Menu Level 2
LASR...ERR (Laser Error)
Supersedes
LINK...LOS (Fiber-Link Loss)
Supersedes
VID...LOS (Video Loss)
Supersedes
OK (Ay-Okay)
Selections Selections
VIN (Video Input)
AIN1 (Audio Input 1)
STAT (Status) AIN2 (Audio Input 2)
AIN3 (Audio Input 3)
AIN4 (Audio Input 4)
PWR (Optical Power)
VER (Software Version)
BACK (Abort)
Selections
FOUT (Fiber-Link Output)
AIN1 (Audio Input 1)
AIN2 (Audio Input 2)
AIN3 (Audio Input 3)
AIN4 (Audio Input 4)
SER (Serial Data)
EMBD (Embedding)
CTRL (Control)
EDET (Error Detection)
JACK (Monitor Jack)
DISP (Display Orientation)
FRST(Factory Reset)
BACK (Abort)

Figure 4-2: Card Edge Menu Structure

Pushbutton
Menu Level 3 Menu Level 4
Selections Indications
Standards Per Table
STD (Video Standard)
LOS (Loss of VIdeo)
Indications
GRP1 (Audio Group 1)
FREE (Group Unused)
GRP2 (Audio Group 2)
USED (Group Used)
GRP3 (Audio Group 3)
CLN (Group Cleaned)
GRP4 (Audio Group 4)
LOS (Loss of Video)
Indications
32K (32KHz)
44K (44KHz)
48K (48KHz)
LOS (Loss of Signal)
Indications
-1 to -40 (dBm Value)
OVR (power over max)
LOW (power under min)
Indications
Software Version
Selections Selections
CONT (Continuous)
LASR (Laser Enable Mode)
DISC (Discontinuous)
Selections Selections
ON (Enable Conversion)
SRC (Sample Rate Convert)
OFF (Disable Conversion)
Selections Selections
232 (RS-232)
TYPE (Data Type)
422 (RS-422)
485 (RS-485)
Selections
RATE (Baud Rate)
Selections Per Table
Selections
ON (Bias On)
BIAS (Failsafe Bias)
OFF (Bias Off)
Selections Selections
GRP1 (Audio Group 1)
GRP2 (Audio Group 2)
A1+2 (AES1 and AES2)
GRP3 (Audio Group 3)
GRP4 (Audio Group 4)
A3+4 (AES3 and AES4)
NONE (Don't Embed)
!∆ used groups are not
provided as selections
Selections
LN1 (Vanc Embed Line 1)
SER (Serial Data)
LN2 (Vanc Embed Line 2)
DID (Data ID)
SDID (Secondary Data ID)
Selections
LN (Vanc Embed Line)
GPIO (GPIO Data)
DID (Data ID)
SDID (Secondary Data ID)
Selections
ON (Clean Input Hanc)
HCLN (Input Hanc Cleaning)
OFF (Pass Input Hanc)
Selections Selections
ON (Indicate Errors to LED)
FIN (Fiber-Link Input)
OFF (Disable Error Indication)
Selections
ON (Indicate Errors to LEDs)
ViN (Video Inputs)
OFF (Disable Error Indication)
Selections
ON (Indicate Errors to LEDs)
AIN (AES Inputs)
OFF (Disable Error Indication)
Selections Selections
AUD1 (Audio 1)
CHAN (Audio Channel) AUD2 (Audio 2)
AUD3 (Audio 3)
AUD4 (Audio 4)
Selections
VOL (Volume)
0 to 64 (Arbitrary Range)
Selections
HORZ (Horizontal)
VERT (Vertical)
Selections
NO (Abort)
YES (Accept)
Version 1.5
Menu Level 5
Selections
0 (Line 0) to 2047 (line 2047)
NONE (Don't Embed Line 1)
Selections
0 (Line 0) to 2047 (line 2047)
NONE (Don't Embed Line 2)
Selections
50 (DID=50) to 5F (DID=5F)
Selections
1 (SDID=1) to FF (SDID=FF)
Selections
0 (Line 0) to 2047 (line 2047)
NONE (Don't Embed)
Selections
50 (DID=50) to 5F (DID=5F)
Selections
1 (SDID=1) to FF (SDID=FF)