Table of Contents
Advertisement
3.
SPECIFICATIONS
3.1.
SERIAL DIGITAL VIDEO INPUT
Number of Signals:
Standards:
Connector:
Equalization:
Return Loss:
3.2.
SERIAL DIGITAL VIDEO OUTPUT
Number of Signals:
Standards:
Connectors:
Signal Level:
DC Offset:
Rise and Fall Time:
Overshoot:
Return Loss:
High Freq. Jitter:
3.3.
AES AUDIO INPUTS
Number of Signals:
Standards:
Connector:
Sampling Rate:
Resolution:
Minimum Input:
Maximum Input:
Balanced:
Unbalanced:
Equalization:
Balanced:
Unbalanced:
Impedance:
Balanced:
Unbalanced:
Return Loss:
Wideband Jitter:
7707MT-HD Multi-Signal HD/SD, AES, and Control Fiber Transmitter
1 Input
SMPTE 292M (HD-SDI), SMPTE 259M-C (SD-SDI),
SMPTE305.2M (SDTi)
BNC input per IEC 169-8
Automatic to 100m (typ) @ 1.485Gb/s with Belden 1694A or equivalent
cable
Automatic to 250m (typ) @ 270 Mb/s with Belden 1694A or equivalent cable
> 15 dB up to 1.5GHz
1 Output
SMPTE 292M (HD-SDI), SMPTE 259M-C (SD-SDI),
SMPTE305.2M (SDTi), EN500083-9 (DVB-ASI)
BNC per IEC 169-8
800mV nominal
0V ±0.5V
150ps nominal @1.485Gb/s
600ps nominal @270Mb/s
<10% of amplitude
> 15 dB up to 1.5GHz
< 0.2 UI
4 Inputs
AES3-2003 (Balanced AES), SMPTE 276M (Unbalanced AES)
16 pin removable terminal strip
32KHz, 44.1KHz, 48kHz
up to 24 bits
< 200mVp-p
> 7Vp-p
> 1.2Vp-p
< 1500ft @ 48KHz, with Belden 1800B, and 2Vp-p source signal
< 1200m @ 48KHz, with Belden 8281, and 1Vp-p source signal
≈ 110Ω
≈ 75Ω
> 15dB, from 1MHz to 6MHz
< 10nsp-p, with conditions of minimum to maximum cable length
Version 1.5
7700 Multi-Frame Manual
Page-9
Advertisement
Table of Contents
