Figure 1-1: 7707Eo-Hd Block Diagram - evertz 7700 Manual

7700 Multi-Frame Manual
7707EO-HD SD/HD Re-Clocking Electrical to Fiber Converter
Features:
•
Supports all SMPTE 292M standards at 1.485Gb/s
•
Supports all SMPTE 259M standards with operation from 143Mb/s-360Mb/s
•
Supports SMPTE 310M (19.4Mb/s), M2S or DVB-ASI (270Mb/s), SMPTE 344M (540Mb/s), and
SMPTE 305M (SDTi) rates
•
Auto rate selection, indication and reclocking for all SDI and HD-SDI data rates from 143Mb/s to
1.485Gb/s
•
Selectable non-reclock mode for other data rates
•
Detection and display of equalization strength, video format, and EDH errors (SDI only)
•
Automatic coaxial input equalization to 150m for all rates to 1.485Gb/s (Belden 1694A)
•
DWDM wavelengths (ITU-T G.694.1 compliant) also available
•
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T
G.694.2 compliant)
•
Supports single-mode and multi-mode fiber optic cable
•
Fully hot-swappable from front of frame
•
Comprehensive signal and card status monitoring via four digit card edge display or remotely
through SNMP and VistaLINK
•
Can be housed in either a 1RU frame which will hold up to 3 modules, a 3RU frame which will hold
up to 15 modules, 3RU portable frame that holds up to 7 modules or a standalone frame which will
hold 1 module
•
VistaLINK capability is available when modules are used with the 3RU 7700FR-C or 350FR
®
portable frame and a 7700FC VistaLINK
SERIAL
INPUT
VistaLINK
®
Interface
7707EO-HD - 2
®
ADAPTIVE
EQUALIZATION
CONTROL/
INDICATION
LOCAL
CONTROL

Figure 1-1: 7707EO-HD Block Diagram

Frame Controller module in slot 1 of the frame
®
RECLOCKING
SMPTE 292M
SMPTE 259M
SMPTE 344M
SMPTE 305M
SMPTE 310M
DVB-ASI
LOCAL
INDICATION
Revision 1.5
OPTICAL
DRIVER
OPTICAL
OUTPUT
CABLE
DRIVERS
SERIAL
OUTPUT
SERIAL
OUTPUT