Advertisement
| QUICK RECORDING
@ Video ALC
e Full-time audo white balance
e Camera output even when color bar is selected
@ Audio recording level is set to the fixed gain (FIX).
Allow 10 seconds or more after the power has been
switched on, otherwise the quick-recording function will
not operate properly.
ITEMS TO BE CHECKED
e For the quick-recording function to work properly, check the
following items:
1. A charged battery must be installed.
2. There is no condensation on the video heads.
3. A cassette with its safety tab in place must be loaded.
PROCEDURE
1. Check points 1, 2 and 3 above.
2. Press the QUICK REC trigger.
3
e@ VTR trigger on the camera
e VTR trigger on the lens
e "PAUSE" button on the VTR
in Record-Pause mode, the camera resumes the status in
which it was before quick recording was initiated.
Note
change at the beginning of recording.
* Service Information:
C) Re
om
O stor
O tay
© muse
3
35
Advertisement
