Haztec 4-1809-X Manual

4-1809-X
LED Scene Light
Thank you for purchasing this Haztec product. Before proceeding with installation it is essential
to read and understand this instruction booklet.

Warning!

 This product must be installed by persons competent in vehicle electrical installations
 Care should be taken to ensure that water ingress cannot occur through mounting or
wiring holes
 Regularly inspect the product to confirm correct operation
 DO NOT stare directly into the light it produces as permanent damage to the eyes
may result
 Use only a mixture of soap and water to clean this product
 DO NOT allow solvents and fuels, etc. to come into contact with this product

Basic Operating Specifications:

Supply voltage range:
Maximum current draw:
Lumen output:
Operating temperature range:
IP rating:
Dimensions (mm):

Connection Instructions:

Wire Connect to
Grey Positive [+] via switch & fuse
White Permanent negative [-]
M295 Issue 1.1 Created by: Technical
10-30VDC
1.3A @ 12VDC
1000
O
-40 C to +65
IP67
250 (L) x 57 (H) x 30 (D)
Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK
T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk
 9-LED angled scene light
 12/24VDC
 0-60 degree vertical asymmetric
beam, 80 degree horizontal beam
 Surface mount
 Available with blue, red or white
cast housing
 3 year warranty
O
C
Function
Main feed
Earth / Chassis ground
December 2020