Haztec 4-1815-X Quick Start Manual

4-1815-X
15-LED Scene Light
Thank you for purchasing this Haztec product. Before proceeding with installation, it is essential
to read and understand this instruction booklet.
▪ This product must be installed by persons competent in vehicle electrical installations
▪ Care should be taken to ensure that water ingress cannot occur through mounting or
wiring holes
▪ Regularly inspect the product to confirm correct operation
▪ DO NOT stare directly into the light it produces as permanent damage to the eyes
may result
▪ Use only a mixture of soap and water to clean this product
▪ DO NOT allow solvents and fuels etc. to come into contact with this product

Basic Operating Specifications:

Supply voltage range:
Maximum current draw:
LED power:
Lumen output:
Beam angle:
Operating temperature range:
IP rating:
Dimensions (mm):
Bezel RAL colours:
Black 9017 (Traffic black)
Yellow 1016 (Sulphur yellow)
M301.1.0
10-30VDC
1.71A @ 12.5VDC
15 x 3W
2025lm
0-70 degrees asymmetric
-40 to +55
IP67
230.13 (L) x 47.95 (H) x 34.1 (D)
235 (L) x 52.5 (H) x 35.5 (D) with 0
235 (L) x 53 (H) x 39.5 (D) with 7
White
Red
Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK
T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk
▪ 15-LED Scene light
▪ 12/24VDC
▪ Surface mount
▪ Choice of bezel colour
▪ IP67 rated
O
C
O
9003 (Signal white)
3000 (Flame red)
- 1 -
O
gasket
gasket
January 2021