Page 1
• Please read instructions carefully before installation. • Check the contents of kit. Contact your Prorack dealer if any parts appear to be missing or damaged. • Clean your roof racks prior to fi tting the roof box. Important Warning •...
Page 2
MIN. = 570 mm MAX. = 840 mm MAX. MAX. MAX. 75 kg 10.4 kg Remove Roof Box Base (A) from Roof Box Lid (B) EXP360U-Rev4.0 Page 2 of 6...
Page 3
Attach Latch Clamps to Roof Box Lid sides 2.5 mm Attach Lid Lifter Pivots to Roof Box Lid front and rear 2.5 mm Place Roof Box Lid (B) on Roof Box Base (A) EXP360U-Rev4.0 Page 3 of 6...
Page 4
Attach Lid Lifters to Roof Box Lid Your assembled Roof Box is now ready to be fitted Continue on Step 7 to install Prorack 360 L Roof Box to your Roof Racks EXP360U-Rev4.0 Page 4 of 6...
Page 5
Fitting Kit 1 (SP166) Fitting Kit 2 (SP167) Use for Standard Bar Use for Aero or Heavy Duty 33 mm 34 - 66 mm 67 - 90 mm 67 - 90 mm MAX. 45 mm 20 - 60 mm 34 - 66 mm 33 mm 4 Nm 4 Nm...
Check and tighten if necessary, before each use. vehicle. • Be sure all hardware is secured according to instructions. Failure to perform safety checks before driving away can result in property damage, personal injury. Prorack Freephone Lock Maintenance: 17 Hinkler Court, Brendale AU: 1800 143 548 www.prorack.com.au...
Need help?
Do you have a question about the EXP360 and is the answer not in the manual?
Questions and answers