Setting Jumper Switches - PCchips M758LMT User Manual

Setting Jumper Switches

Jumpers are sets of pins connected together with caps. Jumper caps
change the way of mainboard's operation by changing the
electronic circuits on the mainboard. If a jumper cap connects two
pins, we say those pins are SHORT; if the cap is removed, they are
OPEN.
JP7
1
Jumper JP7: Clear CMOS Memory
This jumper can clear the contents of the CMOS memory. You
may need to clear the CMOS memory if the settings in the Setup
Utility are incorrect and prevent your mainboard from operating.
To clear the CMOS memory, disconnect all the power cables from
the mainboard and then move the jumper cap into the CLEAR
setting for a few seconds.
Function
Normal Operation
Clear CMOS Memory
2: Mainboard Installation
Jumper Setting
Short Pins 1-2
Short Pins 2-3
13