Mainboard User's Manual
Setting Jumper Switches
Jumpers are sets of pins which can be connected together with
jumper caps. The jumper caps change the way the mainboard
operates by changing the electronic circuits on the mainboard. If a
jumper cap connects two pins, we say the pins are SHORT. If a
jumper cap is removed from two pins, the pins are OPEN.
JMIC1
JP95
1
1
J2
Jumper JBAT1: Clear CMOS Memory
Use this jumper to clear the contents of the CMOS memory. You
may need to clear the CMOS memory if the settings in the Setup
Utility are incorrect and prevent your mainboard from operating.
To clear the CMOS memory, disconnect all the power cables from
the mainboard and then move the jumper cap into the CLEAR
setting for a few seconds.
Function
Normal Operation
Clear CMOS Memory
Jumper J2: Codec Selector
Use this jumper to select the onboard audio codec or Audio
Modem Riser (AMR) slot.
Function
Primary codec onboard
Primary Codec on AMR slot
10
Jumper Setting
Short Pins 1-2
Short Pins 2-3
Jumper Setting
Short Pins 1-2
Short Pins 2-3
JP96
1
JP800
1
1
JBAT1