PCchips M787CLR User Manual page 15

Jumper JP95: BIOS Write Protect Selector
Use this jumper to make the BIOS read-only.
Function
Enable (read only)
Disable
Jumper JP96: Keyboard Power On Selector
If you enable the keyboard power on feature, you can use hot keys
on your keyboard as a power on/off switch for the system.
Note: The system must provide 1A on the +5VSB (+5V Standby)
signal before using the Keyboard Power On function.
Function
Disable Keyboard Power On
Enable Keyboard Power On
Jumper JP800: Enable/Disable Onboard LAN
The mainboard has a built-in 10BaseT/100BaseTX network
adapter. If you plan on using an alternative network adapter, you
must use this 3-pin jumper to disable the onboard network adapter.
Function
Disable Onboard LAN
Enable Onboard LAN
Jumper JMIC1: Microphone Type Selector
Use this jumper to select the microphone type that passive one or
the active one input audio to the sound system.
Function
Passive Microphone
Active Microphone
2: Mainboard Installation
Jumper Setting
Short Pins 1-2
Short Pins 2-3
Jumper Setting
Short Pins 1-2
Short Pins 2-3
Jumper Setting
Short Pins 1-2
Short Pins 2-3
Jumper Setting
Short Pins 1-2
Open Pins 1-2
11