Table of Contents
Advertisement
BIOS Setup
Display Activity;
When set to Yes, these options enable event
Serial Port 1;
monitoring on the specified hardware
Serial Port 2;
interrupt request line and the computer is in a
Parallel Port;
power saving state, BIOS watches for activity
Floppy Disk;
on the specified IRQ line. The computer
Primary Master
enters the full on power state if any activity
IDE;
occurs.
Primary slave IDE;
Secondary Master
IDE;
Secondary Slave
IDE
RTC Alarm Power
Set this option to enable the RTC Alarm to
On
wake up the system which is Soft Off.
RTC Alarm Date;
Set these options to specify the RTC Alarm
RTC Alarm Hour;
time on Date/Hour/Minute/Second.
RTC Alarm
Minute;
RTC Alarm
Second
27
Advertisement
Table of Contents
