Table of Contents
Advertisement
30
Pri. , Sec. OffBoard These two options specify the PCI interrupt used
PCI IDE IRQ
by the primary (or secondary) IDE channel on
the offboard PCI IDE controller.
DMA Channel 0, 1, These options specify the bus that the specified
3, 5, 6, 7
DMA channel is used on.
IRQ3, 4, 5, 7, 9, 10, These options specify the bus that the specified
11, 14, 15
IRQ line is used on. These options allow you to
reserve IRQs for legacy ISA adapter cards.
Reserved Memory This option is designed to be used for reserving
Size
memory for the IO card.
Reserved Memory This option is designed to be used for reserving
Address
memory address for the IO card.
Peripheral Setup
Choose the item from the BIOS Setup main menu.
Sound Pro Chip
Set this option to Enabled the onboard Sound Pro
Support
function.
OnBoard FDC
Set this option to Enabled the FDC(Floppy Drive
Controller) on the motherboard or auto detects
the FDC.
Floppy Drive Swap Set this option to Enabled you to swap floppy
drives between A: and B:.
Floppy Access
Set this option to select the floppy access control.
Control
OnBoard Serial
Set this option to specify the base I/O port
Port1
address of serial port 1.
Chapter 3
Advertisement
Table of Contents
