Table of Contents
Advertisement
20
Pri Master;
Choose these icons to configure the hard disk
Pri Slave;
drive named in the option. When you click on
Sec Master;
an icon, the following parameters are listed:
Sec Slave
Type, LBA/Large Mode, Block Mode, 32Bit
Mode, and PIO Mode. All parameters relate to
IDE drives except Type. Choose the Type
parameter and select Auto BIOS automatically
detects the IDE drive parameters and displays
them. Choose on LBA Mode and choose On to
enable support for IDE drives with capacities
greater than 528MB. Click on Blk Mode and
choose On to support IDE drives that use Blk
Mode. Click on 32Bit Mode and click on On to
support IDE drives that permit 32-bit accesses.
Floppy Drive
Choose the Floppy Drive A or B icon to specify
A; B
the floppy drive type. The settings are 360KB
1
1
5
/
", 1.2MB 5
/
4
1
or 2.88MB 3
/
".
2
Chapter 3
1
1
", 720KB 3
/
", 1.44MB 3
/
",
4
2
2
Advertisement
Table of Contents
