Peripheral Setup - PCchips M596 Manual

BIOS Setup
ReservedMemory Set these options to select reserved memory
Size, Address size and started address for the IO card.

Peripheral Setup

Choose this Setup item from the BIOS Setup main menu.
Onboard FDC This option enables the FDC (Floppy Drive
Controller) on the motherboard.
Serial Port1 This option specifies the base I/O port
address of serial port 1.
Serial Port2 This option specifies the base I/O port
address of serial port 2.
OnBoard Ir Port Set this option to Enabled the IR port.
Ir Mode; Ir Duplex Set these option to select the type of IR
module.
On-board Parallel This option specifies the base I/O port address
Port of the parallel port on themotherboard.
Parallel Port Mode This option specifies the parallel port mode.
Normal: The normal parallel port mode is
used.
EPP: The parallel port can be used with
devices that adhere to the
Enhanced Parallel Port (EPP)
specification. EPP uses the existing
parallel port signals to provide
asymmetric bi-directional data
transfer driven by the host device.
29