Table of Contents
Advertisement
NETWORk SETTINGS
2.
Specify the settings to be used to assign LAN IPv6
addresses by entering the following details:
•
IPv6 LAN Configuration (select Stateless
IPv6 LAN Configuration
dropdown list)
•
LAN Link Local Address
LAN Link Local Address (automatically populated)
•
Router Advertisement Lifetime
Router Advertisement Lifetime (minutes between 0-150)
•
Option: Allow ICMPv6 Echo Request for LAN devices
Option: Allow ICMPv6 Echo Request for LAN devices
using their Global IPv6 Address from WAN side -
using their Global IPv6 Address from WAN side
requesting an IPv6 address from any available DHCPv6
servers available on the ISP
3.
After entering all appropriate IPv6 settings, click Apply
changes
changes to have changes take effect.
DhCPv6 PD - WAN IPv6 Address Connection
The IPv6 WAN DHCPv6 configurations are IPv6 settings that you
enter that will allow your IPv6 connection to be updated by the ISP
as needed.
1.
To configure IPv6 WAN Stateful (DHCPv6) mode, select the
DHCPv6-PD
DHCPv6-PD option on the IPv6 Configuration Controls
as shown below:
Stateless from the
IPv6 Configuration Controls page
Apply
- Quick Links:
- Advanced Settings
- Network Settings
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
