Verizon FSNO21VA User Manual page 134

3. To define a network object, enter a name for the network
object in the Objects Name
4. Select and configure the type of network object as IP
address, IP subnet, IP range, MAC address, host name, or
DHCP option, and click Add
5. The network object displays in the Objects List
6. Repeat the above steps to create additional network objects.
7. When complete, click Apply Changes
5.1k/ PORT CONFIGURATION
Ethernet port configuration allows you to set up the Ethernet ports
as either full- or half-duplex ports, at either 10 Mbps, 100 Mbps, or
1000 Mbps.
http://setup.verizon.com/businessinternetgateway |
Objects Name field.
Add.
Apply Changes to save changes.
05 / CONFIGURING
ADVANCED SETTINGS
Objects List section.
©2023 Verizon. All Rights Reserved
134