Verizon FSNO21VA User Manual page 47

• Select the Keep my channel selection during power cycle
check box to save your channel selection when your
Gateway is rebooted.
• Enable DFS channels during channel scan Enable DFS channels during channel scan: DFS channels
are enabled by default during channel scans.
Note: DFS channels are a subset of the 5 GHz network that
is shared with radar systems. Some consumer devices do
not support these channels and cannot connect to gateways
using them. Examples include some media streaming devices.
Disabling this feature will allow the Gateway to select the best
available channel to broadcast on and allow these devices to
connect.
• Press Apply Changes
3. Click Scan Scan to perform a channel availability scan for the
Gateway to identify the radio channels providing the best
Wi-Fi performance.
4. On the Radio Management Radio Management page for either 2.4 GHz or 5 GHz,
the following information displays and can be configured:
http://setup.verizon.com/businessinternetgateway |
Keep my channel selection during power cycle
Apply Changes to save the changes.
03 / WI-FI SETTINGS
©2023 Verizon. All Rights Reserved
47