Verizon FSNO21VA User Manual page 100

• Option: Allow ICMPv6 Echo Request for LAN devices Option: Allow ICMPv6 Echo Request for LAN devices
using their Global IPv6 Address from WAN side using their Global IPv6 Address from WAN side -
requesting an IPv6 address from any available DHCPv6
servers available on the ISP
3. After entering all appropriate IPv6 settings, click Apply
changes to have changes take effect. changes
DhCPv6 WAN with LAN IPv6 Stateless Settings
1. To configure IPv6 LAN Stateless mode with DHCPv6 WAN,
select the Stateless
Controls Controls page as shown below:
2. Specify the settings to be used to assign LAN IPv6
addresses by entering the following details:
http://setup.verizon.com/businessinternetgateway |
Stateless option on the IPv6 Configuration
05 / CONFIGURING
ADVANCED SETTINGS
Apply
IPv6 Configuration
©2023 Verizon. All Rights Reserved
100